The simple way to making a Stand Lamp For Home Office. Each and every person desire to buy a lamb but the cost is not affordable. Here we gonna be describe making stand lamb with affordable price. Initailly take pvc pipes and elbows for making. you can choose one PVC pipe of around four feet tall and one inch in diameter. You can always shorten the lamp a little taller or a little shorter. But all of you need to do get your pipe cut according to your desire.
Next to make the base of the lamp you can use another PVC pipe with four inches. This also according to your desire. Next you need is one elbow joint and and then some white cement of two small case. The a code of plug which also available in local store. If you cannot fix this you can fix from shop. You can choose your paint mostly spray paint is safe for using. Which simply use at the body of lamp.
Next step fit each other, firstly four-inch pipe sits on a plastic plate-like top of some tin. THen attached the elbow to one end of the four feet long pipe and put in inside. Then make white cement and then put a mark on the outside where the elbow was pacing elbow to one end of the four feet along pipe and put it inside. Make some white cement and then put a mark on the outside where the elbow was pacing
And then went on pouring the white cement inside the base and let it dry for two days and after all the only way to cutout the PVC pipe from this. Then cut the PVC pipe by blade which hlps to remove PVC vary simply. TH eyou should sand the an dclean the the portion which removed PVC. Then start to drill through the pipe on the marked area this is whrer the elbow pipe was facing.
Detailed Information is given in following videos.
